Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Salt Lake City
If your dryer is taking two cycles to finish a load, or the laundry closet gets hot enough that you leave the door open, the vent is the first thing to check. We handle dryer vent cleaning across Salt Lake City with professional-grade equipment, not a shop vac and a brush from the hardware store. Our technicians have up to 11 years of experience, and we know how the older homes on the east bench and in the Avenues are built, right down to the original sheet-metal runs behind the walls. Call (855) 752-4416. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Salt Lake City Homeowners Call Banner Air Duct Cleaning for Dryer Vent Cleaning
Most of the calls we get from Salt Lake City come from people who tried a discount cleaner once and learned the hard way that a high-pressure blast down a vent doesn’t remove packed lint from a crushed run. We show up with Rotobrush and Nikro equipment, we put a camera in the line, and we tell you what we actually found before anyone touches a tool. We clean it and, if it’s broken, we fix it, which means you don’t have to call a separate HVAC contractor once we find a disconnected joint.
Salt Lake City homeowners stay with us because the work is checkable. You see the before-and-after photos of your own vent, not a stock image on a website. You get one flat price per system agreed before work starts, and you get an honest answer about whether the run needs cleaning, repair, or replacement. Our technicians have up to 11 years of experience in valley homes, from mid-century ranches to 1990s subdivisions, and they know what a real clog looks like versus what a scare tactic looks like. The dryers here have to move lint through long runs in tight chases. That’s a fire risk, and we treat it like one.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Dryer Vent Installation in Salt Lake City
Dryer Vent Installation in Salt Lake City is usually the right call when an existing run can’t be saved: crushed flexible foil behind a finished wall, a run that’s been patched twice, or a termination that lets snow or backdraft in. We install rigid or semi-rigid metal ducting sized to your dryer, route it as straight as the house allows, and check the outside termination and flapper before we call it done. A typical dryer vent installation in Salt Lake City runs $175 – $450, with the written estimate setting the final price.
Rigid Ducting in Tight Chases
Many Salt Lake City homes bury the dryer run in a shallow wall cavity with almost no clearance. Rigid metal gives you the smoothest interior surface and the least lint catch, and we work to keep bends to a minimum even when the wall doesn’t cooperate.
Termination and Bird Guard Work
A new run is only as good as its outside end. We fit a proper termination cap and, where birds and nesting material are a recurring problem, a bird guard sized so it stops the animals without choking airflow. That detail matters more than most people realize.
Dryer Vent Repair in Salt Lake City
Dryer Vent Repair in Salt Lake City fixes the leaks, disconnects, and crushed sections that keep a vent clogging no matter how often it’s cleaned. A camera inspection of the lint pathway tells us where the run broke, and we seal the joint or replace the section rather than vacuuming around a problem that will come back. A typical dryer vent repair in Salt Lake City runs $150 – $400, and the written estimate sets the final price before we start.
Reconnecting and Sealing a Broken Run
Original sheet-metal dryer runs behind finished basement walls in older Sugarhouse and Avenues homes come apart at a joint after decades of settling. When that happens, lint blows into the wall cavity instead of outside. We reconnect and seal the run so the pathway holds.
Replacing Crushed Flexible Foil
Flexible foil installed during a DIY basement finish is a common find. It kinks, chokes airflow, and can overwork the dryer’s thermal cutoff. We confirm the material and length, then swap the bad section for ducting that keeps its shape.
Trusted Brands We Service in Salt Lake City
We work around the air-quality equipment already in your home. That includes Honeywell and Aprilaire whole-home filtration and humidification systems, and we clean around them without voiding manufacturer expectations. Our duct and vent work runs on Rotobrush and Nikro equipment, with Abatement Technologies air scrubbers deployed during service to contain particles as we work. We don’t claim to stock parts for these brands, and we won’t pretend to. What we offer is familiarity with how they’re installed and fast turnaround on the cleaning and repair side. Call (855) 752-4416 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Salt Lake City Homes
Salt Lake City sits in a basin that traps winter inversion smog and catches Gobi and Great Basin dust on spring cold fronts. That dust and soot lands on the same housing stock, and the dryer vent is where it shows up first.
- Runs that share a chase with dirty return air. The east bench and Avenues homes run original sheet-metal trunk lines whose leaky joints pull in the red wind-blown dirt and inversion soot that settles on the valley each winter. The dryer run often sits in the same chase, so it never vents cleanly to the outside.
- Disconnected joints behind finished basement walls. Decades of settling pull original sheet-metal runs apart at a joint, and lint escapes into the wall cavity. The vent feels clear when you check it, but nothing is reaching the outside.
- Crushed flexible foil from DIY basement finishes. A mid-century ranch or bungalow gets remodeled, the original vent gets rerouted, and thin foil goes in where rigid metal should be. It kinks, overloads the dryer’s thermal cutoff, and clogs fast.
- Buried or clogged exterior terminations. Snow piles against a low flapper, or spring Great Basin dust and nesting material pack into the cap, and the lint pathway backs up even when the run itself looks clean from the inside.
Pricing for Dryer Vent Cleaning in Salt Lake City, UT
We don’t quote per vent or hand out a teaser coupon. One flat price per system, agreed before work starts, and the written estimate sets the final cost. A typical dryer vent cleaning in Salt Lake City runs $125 – $225. Dryer vent repair runs $150 – $400, and a new dryer vent installation runs $175 – $450. What pushes a job toward the higher end is length and routing: long runs, several bends, a termination that’s hard to reach, or a wall that has to be opened to reconnect a broken joint. A camera inspection and before-and-after photos of your own vent are part of how we work. Estimates are free, so you know the number before anyone touches a tool. Call (855) 752-4416 for an exact quote.
We Also Serve Cities Near Salt Lake City
Our dryer vent cleaning work reaches well beyond the city line. If you’re in Salt Lake City and need the same service across the valley, we also cover South Salt Lake, Murray, Millcreek, and Holladay. The housing stock shifts a little block by block, and the vent problems do too. Call (855) 752-4416 and we’ll talk through your run.
Serving Salt Lake City, UT – Our Local Coverage Area
We serve Salt Lake City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Salt Lake City
Original sheet-metal dryer runs in older Salt Lake City homes come apart at a joint after decades of settling, and a broken joint blows lint into the wall cavity instead of outside. West-valley subdivisions built in the 1990s and 2000s tend to have shorter, newer runs that haven’t moved yet. Call (855) 752-4416 for an exact quote; estimates are free.
Yes. Winter inversions along the Wasatch Front trap PM2.5 in the valley for days, and spring cold fronts off the Great Basin loft visible dust that settles into return grilles and vent pathways. That loading is why the same dirty chase feeds lint into a dryer run, and it’s why cleaning alone sometimes fails. Call (855) 752-4416 and we’ll look at the whole pathway.
A camera inspection of the lint pathway shows the disconnect without guesswork. The technician confirms duct material and length, checks the outside termination flapper and the air handler area, and explains what needs reconnecting or replacing before work starts. Call (855) 752-4416 for an exact quote; estimates are free.
Often, yes. When the run is crushed foil or an undersized patch job, replacing it with rigid metal ducting and a proper termination cap stops the recurring clog. A typical dryer vent installation in Salt Lake City runs $175 – $450, with the written estimate setting the final price. Call (855) 752-4416 and we’ll tell you if installation is the real fix.
Yes. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday, but a call outside dispatch hours gets booked into the next opening. Call (855) 752-4416.
When your dryer runs hot, takes two cycles, or the laundry closet won’t cool down, the vent is where to start. We use restoration-grade equipment, we put a camera in the line, and we fix what’s broken instead of vacuuming around it. One flat price per system, agreed before work starts, with before-and-after photos of your own vent. Call (855) 752-4416 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Banner Air Duct Cleaning.