Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Murray, UT
We provide independent Lennox air duct cleaning across Murray, and the thing that sets our Lennox work here apart is this: we treat your ductwork as the air-side half of your Lennox system, not as a generic pipe to be flushed. In a valley where winter inversions trap fine particulate for weeks, what your Lennox furnace pulls through its return side matters more than most homeowners realize. We’re an independent shop, not affiliated with Lennox, so our only allegiance is to solving the dust and pressure problems in your house. Call (855) 752-4416 and we’ll walk you through what a real Lennox-focused cleaning looks like.
Why Murray Residents Choose Us for Lennox Service
Most duct cleaners show up with a shop vac and a coupon. We show up with a Rotobrush rotary brush system and Nikro HEPA-rated extraction that captures particles down to 0.3 microns, plus Abatement Technologies air scrubbers running during the service to contain what gets dislodged. That hardware difference is why Murray homeowners with Lennox equipment call us back.
Our technicians have up to 11 years of experience, and they understand how Lennox ducted systems are laid out and how their control boards manage airflow. We don’t claim any official Lennox certification or dealer status, and we won’t pretend otherwise. What we do is bring deep hands-on familiarity with Lennox furnaces and air handlers, quality parts that fit them properly, and a repair capability on staff so a torn flex run or disconnected fitting gets fixed rather than worked around. Scheduling is straightforward: call, describe what you’re seeing, and we’ll book a free estimate.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Murray
These are the failures we see most often when a Lennox system and Murray’s climate collide:
- Undersized returns on Merit Series furnaces. In mid-century Murray ranches, original return ducts are often too small for a hard-working blower. Through long Wasatch Front winters the furnace runs for months, starving for air and pulling dust from leaky chases instead of moving it cleanly.
- Cracked or clogged condensate traps and drain pans. Older Lennox split systems develop hairline cracks or algae clogs in the trap. That moisture promotes biological growth right where the airstream picks up, and supply ducts distribute it through the house.
- Dust-caked variable-speed blowers. The variable-speed motors on Elite and Signature Series systems can load up with dust during Murray’s dry, dusty summers. An unbalanced blower wheel raises static pressure and pushes uneven airflow through the ductwork.
- Sagging flex runs at the air handler. Flexible duct connected to a Lennox air handler often sags or tears at the fitting, letting attic or crawlspace air into the system. This is especially common in older Murray homes with original sheet-metal trunks.
- Unsealed return chases. The classic 84107 problem: a return chase that wasn’t sealed at install draws musty crawlspace air with every heating cycle. Cleaning registers without sealing that chase just moves the problem around.
Lennox Service in Murray: What Local Conditions Mean for Your Equipment
Murray sits in the Salt Lake Valley’s winter inversion zone, where PM2.5 gets trapped against the Wasatch Front for weeks at a time. Neighboring cities farther out of the valley don’t share this to the same degree. That makes duct cleaning here less about routine maintenance and more about how a household manages a genuinely documented air-quality problem. Your Lennox furnace and air handler are effectively the lungs of the house during inversion season, and every leak in the return side becomes an intake for whatever the valley is holding.
In the older ranch homes off the 84107 grid, return-air chases are frequently unsealed and pull air straight from musty crawlspaces. A Lennox Merit furnace in that setup draws crawlspace dust into the airstream with every heating cycle, then distributes it through the supply side. Newer infill and condo construction near the light-rail corridor doesn’t have this problem to the same degree, which is why a Lennox system in a 1960s ranch needs a different diagnostic path than one in a recent build. That’s the whole point of treating the ducts as part of the equipment.
Lennox Models & Products We Service in Murray
We work on the Lennox furnace and air-handler families that show up across Murray: Merit Series gas furnaces, Elite Series gas furnaces, Dave Lennox Signature Collection furnaces, and Lennox variable-speed air handlers. On the air side we handle return duct cleaning, duct sealing, and video inspection, so you can see inside the system before and after.
For Lennox-specific components like control boards and blower motors, OEM parts are the safest bet for reliability and fit, though quality aftermarket equivalents make sense for common wear items like filters and belts. We don’t stock or order OEM Lennox parts as a dealer would. We’re an independent shop that sources quality parts that fit the equipment, and we’ll tell you plainly when duct improvements alone will solve the problem versus when the equipment itself needs attention.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Murray
Duct cleaning is quoted per system, not per vent, because per-vent pricing inevitably expands once the technician is inside the house. We agree one flat price per system before work starts, and we’ll show you before-and-after photos of your own ducts so you know the work actually happened.
What drives the price: the number of systems in the home, how much the return side has leaked, whether the crawlspace chase needs sealing, and whether we find a damaged flex run or disconnected fitting that has to be repaired as part of the job. Repair is a standalone service, so you’ll see it priced clearly rather than buried inside a cleaning quote. Our technicians have up to 11 years of experience, and the free estimate includes a look at your Lennox equipment’s airflow behavior. Call (855) 752-4416 for an exact quote.
Serving Murray, UT – Our Local Coverage Area
We serve Murray and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Murray
That smell almost always traces to an unsealed return chase drawing air from a musty crawlspace. Older Murray ranches frequently have return chases that were never sealed at install, so every heating cycle pulls crawlspace air into the airstream and pushes it out through the supply registers. The fix is sealing that chase first, then cleaning the blower, supply and return ducts. Call (855) 752-4416 for a free inspection.
Yes. During inversion season, PM2.5 gets trapped against the Wasatch Front for weeks at a time, so any leak in your return side becomes an intake for the worst air of the year. A tight, clean duct system means your Lennox filter is doing the filtering instead of the leaks. Call (855) 752-4416 to schedule an assessment.
There’s no single schedule that fits every home. In Murray’s older 84107 ranches with original sheet-metal ductwork and an unsealed return chase, the interval is often shorter than in newer infill construction near the light-rail corridor. If you see dust streaks around registers or smell mustiness when the heat runs, it’s time for a look. Call (855) 752-4416 and we’ll give you an honest read on timing.
Sometimes it’s a big part of the fix, and sometimes the blower itself is the problem. A variable-speed blower caked with dust during Murray’s dry, dusty summers runs unevenly and raises static pressure. Cleaning the blower wheel, checking the flex runs at the air handler for sagging or tears, and sealing the return side often restores balance. Call (855) 752-4416 for a video inspection and estimate.
Repairing the ducts is often the right first move, and we’ll say so if the existing Lennox equipment is sound enough that duct sealing and cleaning solve the problem. Durable metal repairs and proper sealing beat repeated patch jobs. Replacing equipment without fixing an unsealed return chase just puts new hardware in front of the same leaks. Call (855) 752-4416 for a free estimate and a straight opinion.
Service Areas Near Murray
We work across Murray and the surrounding valley, including Salt Lake City, South Salt Lake, Millcreek, and the communities toward the northern bench like Bountiful and North Salt Lake. If you’re looking for Lennox-focused service in Midvale or Lennox service in Holladay, our Lennox expertise covers both. See our broader Murray service page for the full scope, and our dedicated pages for Midvale and Holladay if you’re just outside the immediate Murray area.
Book Your Lennox Service in Murray Today
If your Lennox system is pulling dust, musty air, or uneven flow through the ducts, we can take a look. The estimate is free, the price is set per system before work starts, and you’ll see before-and-after photos of your own ducts. Call (855) 752-4416. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Banner Air Duct Cleaning.